¡@

ZY-200XE Features :

1. Lead free double wave soldering tank special channel and adjustable nozzle design, the use of specially designed for small

    scale of lead-free DIP process,  solder tank with titanium alloy material , stainless steel sleeve type heating device, PID

    temperature control.

2. Wave solder nozzle for lead-free process design of the adjustable nozzle, convenient adjustment, jet height up to 10mm, lead-

    free PCB parts can run through, reduce hollow welding and short-circuit phenomenon for perfect welding.

3. The conveying track, a foaming tank, spray tank, preheating zone are integral in strengthening of the auxiliary rail.  A

    complete adjustment angle and can be adjusted both front and rear.  Also  with coating  type sleeve,  convenient adjustment

    is not easy to be stained with tin.

4. Track is reinforced aluminum alloy material, aluminum rail body with three stainless steel scuff strip to prevent the track

    deformation and wear

5. The conveying track with a torque limiter, protection of PCB and conveying mechanism

6. Preheating zone is a sealed with length of 450mm.  Quartz tube heating, can choose the hot air preheating zone, thermal

    compensation quickly stable, cover with high temperature tempered glass, high safety

7. Temperature control by programmable controller, according to the PID operation processing

8. Equipped with a circular digital timer, can be set to automatically switch time

9. Welding angle can be adjusted to 0 ~ 6 degrees, front and rear adjustable.

10. Spring washer cleaning brush is divided into two sections. Front section cleaning rear section wipe clean, ensure the spring

      washer cleaning well and avoid wash liquid outflow.

11. Tin tank level synchronous lifting for adjustment, a solder tank drag out system is convenient for tin exchange, can choose

       to automatically adjust the solder tank lifting.

12. Track width with full protection, prevent flux and foreign matters falling causing card jam and rotation unsmooth, can

      choose to automatically adjust track width and lifting '

13. Equipped with a base board output system with air cooling device.  It can be selected with quickly compressor cooling

      system.

14. Cylinder reciprocating sprinkle-nozzle system, corresponding to the PCB width and spraying time automatic adjustment

      for FLUX uniform coated PCB.

15. Operation panel and control box are isolated with machine body, not easy to cause dangerous, can choose

      the microcomputer touch screen control.