1. Compact type Hot Air Circulation Reflow Machine has the advantages
    of small size, does not occupy space, and also can simulate the
    advantages of large Hot Air Circulation Reflow Machine.

2. Most suitable for laboratory, researchers and a small amount of
    diversity, simple product use.

3. The lowest power consumption, and the price is affordable.

4. Imported quartz tube, direct and rapid heating

5. Base is installed or canceled according to requirements, flexibility
    application.

6. Temperature control uniform.

7. Design according to the demand, ZONE number and the heating 
    length may depend on customer demand changes.

1. Table type Hot Air Circulation Reflow Machine has the advantages
    of small size, does not occupy space, and also can simulate the
    advantages of large Hot Air Circulation Reflow Machine.

2. Most suitable for laboratory, researchers and a small amount of
    diversity, simple product use.

3. The lowest power consumption, and the price is affordable.

4. Imported quartz tube, direct and rapid heating

5. Base is installed or canceled according to requirements, flexibility
    application.

6. Temperature control uniform.

7. Design according to the demand, ZONE number and the heating 
    length may depend on customer demand changes.

1.  Microcomputer fully automatic SSR+ PID thermo-control system
to make up temperature in a speedier and exact way. Higher
accuracy and stronger stability to maintain thermo-control
accuracy within ± 1 degree.

2.  Independent circuit space is provided in each zone. Through
three specific turbulent heat-collecting plate, compulsory
stabilized hot air convection is achieved between each
compartment inside the machine. The temperature is distributed
to each zone uniformly to eliminate shade and sheltering effect
and overcome the annoyance of uneven heating.

1. New attraction type hot air circulating system, a high efficiency
thermal compensation, temperature uniformity is good, 
minimum temperature difference, fully meet the demand for
lead free process

2. To strengthen the track is composed of special aluminum alloy
and stainless steel, rail section design, and adjustable gap, 
wear resistance and no deformation due to thermal
expansion and contraction, ensure the balance degree

1.  Specific conveying structure and balance design work to keep
smooth and balanced operation. Further, precision digit is
displayed in an instant and direct manner to facilitate non-speed
adjustment and operation, time saving and convenient.

2.  Hot air speed adjustment is controlled by independent upper
and lower zone frequency changers. Digital display is available for
value accuracy adjustment to send out alarm immediately
should an abnormal shutdown of the circuit motor happen so as to
avoid man-caused negligence.

1. Lead free double wave soldering tank special channel and 
    adjustable nozzle design, the use of specially designed for lead-free
    DIP process,  solder tank with titanium alloy material , stainless steel
    sleeve type heating device, PID temperature control.

2. Wave solder nozzle for lead-free process design of the adjustable
    nozzle, convenient adjustment, jet height up to 12mm, 
    lead-free PCB parts can run through, reduce hollow welding and 
    short-circuit phenomenon for perfect welding.

1. Lead free double wave soldering tank special channel and
    adjustable nozzle design, the use of specially designed for small
    scale of lead-free DIP process,  solder tank with titanium alloy
    material , stainless steel sleeve type heating device, PID temperature
    control.

2. Wave solder nozzle for lead-free process design of the adjustable
    nozzle, convenient adjustment, jet height up to 10mm, lead-
    free PCB parts can run through, reduce hollow welding and
    short-circuit phenomenon for perfect welding.

3. The conveying track, a foaming tank, spray tank, preheating zone
    are integral in strengthening of the auxiliary rail.  A complete
    adjustment angle and can be adjusted both front and rear.
    Also  with coating  type sleeve,  convenient adjustment is not easy
    to be stained with tin.

1. High precision SERVO MOTRO architecture :
    Use linear guide rail with servo motor drive which ensure the printing
    in stable and precision. 

2 LED printing speed display :
   Digital LED display with blade guiding speed.  Good for production
   condition record and reference. 

3 Micrometer printing pressure indication display :
   Build with Micrometer for blade printing pressure display.  Good for
   production condition record and reference. 

4 Printing gap display :
   Use Micrometer printing pressure indication for printing gap between
   flatbed and steel plate adjusting display. 

5 Adjustable printing arm :
   The machine  can be  adjusted  arms  respectively, suitable for
   different  sizes between  470 ~ 650mm. 

6 Combined  with  universal die plate :
   Honeycomb type plate can be set base on base plate dimension.
   Thimble pin regardless of  single-side  or double-side , all can be
   used. 

7 Touch panel control :
   Simplify process with touch panel control, can be saved operation
   time.

1. PLC programmable microcomputer control system

2. LCD touch panel display operation, easy operation.

3. PCB rack automatic replacement, save manpower

4. Standard PCB rack can be placed in three (including the
    using one), can be customized.

5. Four segment selection: 10 ~ 40mm

6. Flow direction from right to left, can be customized.

7. Can be used with any SMT MOUNTER brands

8. Use Japanese PANASONIC motor and brake system

9. Rack conveying use special plastic steel, conveying indeed,
    no need add lubricating oil

1. PLC programmable microcomputer control system

2. LCD touch panel display operation, easy operation.

3. PCB rack automatic replacement, save manpower

4. Standard PCB rack can be placed in three (including the
    using one), can be customized.

5. Four segment selection: 10 ~ 40mm

6. Flow direction from right to left, can be customized.

7. Can be used with any SMT MOUNTER brands

8. Use Japanese PANASONIC motor and brake system

9. Rack conveying use special plastic steel, conveying indeed,
    no need add lubricating oil

1. PLC programmable microcomputer control system

2. LCD touch panel display operation, easy operation.

3. PCB rack automatic replacement, save manpower

4. Standard PCB rack can be placed in three (including the using one)
    can be customized.

5. Four segment selection: 10 ~ 40mm

6. Flow direction from right to left.  Can be customized.

7. Can be placed behind with ICT, ATE, AOI  and other  testing
    machine, use as the classification and storage

8. Use of Japanese PANASONIC motor and brake system

9. Rack conveying use special plastic steel, conveying indeed,
    no need add lubricating oil

1. Can be Connected behind detection machine, to identify the OK
    board and NG board

2. Double plate machine integration function on the same machine,
    can save space and volume and high density

3. The conveying track with aluminum extrusion molding integration,
    not easy to deform

4. When the OK board, it can be placed on the
    first MAGAZINE, NG board can be placed in the second
    MAGAZINE, to distinguish between good and bad board

5. In the middle of the machine with induction of SENSOR, can avoid
    mis-operation

6. Can be connected with different brands of testing machine

1. Panel display, easy maintenance, repair simple

2. Flow direction, from right to left, can be customized

3. Can be used with any SMT MOUNTER brands

4. Use of parallel plate feeding structure, the suction plate stability
    does not fall

5. Strong structure design, durable and easy to operate

6. Report of three color signal light, easy to master the machine
    operation status

7. Can be stored of large quantity PCB

8. Use of Japanese PANASONIC motor and brake system

1. Lifting conveyer belt, one end can be opened, in order to facilitate
    the operation personnel through

2. Track width adjustment with ball screw shaft, convenient
    adjustment, durable and high precision

3. The conveying track with aluminum extrusion molding integrated,
    not easy to deform

4. With the VR speed control, speed can be adjusted freely

5. In the middle of the machine with induction of SENSOR, can
    automatically stop for board checking

6. With the lighting lamps and work instruction board, in order to
    facilitate the operation

7. Anti-static wear-resistant belt, won't damage the PCB.

1. The machine in the cleaning process no need to add  defoaming
    agent. General washing machine needs 2 ~ 4 hours and need
    adding defoaming agent.

2. All the high-pressure spray pipe can be arbitrarily adjusted angle.
    And the spraying pressure can be adjusted to achieve the
    cleaning effect of perfect.

3. Heat resistant invasive heating, and install leakage circuit breaker,
    in order to ensure the safety operation of cleaning process.

1. Track width adjustment with ball screw shaft, convenient
    adjustment, durable and high precision

2. The conveying track with aluminum extrusion molding 
    integrated, not easy to deform

3. With the VR speed control, speed can be adjusted freely

4. In the middle of the machine with induction of SENSOR, can
    automatically stop for board checking

5. With the lighting lamps and work instruction board, in order
    to facilitate the operation

6. Anti-static wear-resistant belt, won’t damage the PCB.

ZY-600UT
Automatic PCB Inverter Machine

1. Panel display, easy maintenance, repair simple

2. Flow direction from right to left, can be customized.

3. Can be used with any SMT MOUNTER brands

4. The upper and lower plate turning structure of the machine, the
    turning plate stability does not fall

5. Strong machine structure, beautiful, durable and easy to operate

6. With three color signal light, easy to master the machine operation 
    status

7. Use Japanese PANASONIC motor and brake system

1. Light weight, convenient to move.

2. During tin slag trough clean, can be carried out at the same
    time of tin slag recycling.

3. Simple operation, the user easy to operate.

4. Tin slag recovery rate reaches above 70%

ZY-G100
Feeder Stocker

1. Feeder trolley can be placed the feed shelf, storage in the trolley.

2. Total upper and down layers can be placed 50 Feeder (8mm), 
    in order to facilitate the operation needed.

Solder Paste Stirrer

1. Mixing principle is through the motor revolution and rotation of the
    stirring method, without prior to defrost the paste of ice, can be
    defrosted in a short time. At the same time, stirring evenly and can
    be used immediately.

2. Any brand of 500g or 1000g solder paste can be also stirred two
    cans, save time and improve work efficiency.

3. The machine adopt microcomputer control, LED digital, display, 
    simple operation